Ryobi CSB125 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Motorsägen Ryobi CSB125 herunter. Ryobi CSB125 User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 48
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
7-1/4 in. CIRCULAR SAW
DOUBLE INSULATED
SCIE CIRCULAIRE
DE 184 mm (7-1/4 po)
DOUBLE ISOLATION
SIERRA CIRCULAR
DE 184 mm (7-1/4 pulg.)
DOBLE AISLAMIENTO
CSB125
WARNING: To reduce the
risk of injury, the user must read and
understand the operator’s manual
before using this product.
SAVE THIS MANUAL FOR
FUTURE REFERENCE
ADVERTENCIA: Para reducir
el riesgo de lesiones, el usuario debe leer
y comprender el manual del operador
antes de usar este producto.
AVERTISSEMENT :
Pour
réduire les risques de blessures,
l’utilisateur doit lire et veiller à bien
comprendre le manuel d’utilisation avant
d’employer ce produit.
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
INCLUDES: Circular Saw, 7-1/4 in. Blade,
Blade Wrench, Operator’s Manual
TABLE OF CONTENTS
****************
General Power Tool Safety
Warnings .........................................2-3
Circular Saw Safety Warnings .........3-5
Symbols ..............................................6
Electrical ............................................. 7
Features ..............................................8
Assembly .........................................8-9
Operation .......................................9-13
Adjustments .....................................14
Maintenance ..................................... 15
Accessories ......................................15
Illustrations ..................................16-19
Parts Ordering / Service ..... Back Page
INCLUT : Scie circulaire, lame de 184 mm
(7-1/4 po), clé de lame, manuel d’utilisation
TABLE DES MATIÈRES
****************
Règles de sécurité relatives
aux outils électriques ......................2-3
Avertissements de sécurité
relatifs au scie circulaire ..................3-5
Symboles ............................................6
Caractéristiques électriques ...............7
Caractéristiques .................................8
Assemblage .....................................8-9
Utilisation .......................................9-13
Réglages ...........................................14
Entretien ...........................................15
Accessoires ......................................15
Illustrations ..................................16-19
Commande de pièces /
réparation ..........................Page arrière
INCLUYE: Sierra circular, hoja de 184 mm
(7-1/4 pulg.), llave de la hoja, manual del
operador
ÍNDICE DE CONTENIDO
****************
Advertencias de seguridad
para herramientas eléctricas ...........2-3
Advertencias de seguridad
sierra circular ...................................3-5
Símbolos ............................................6
Aspectos eléctricos ............................ 7
Características ...................................8
Armado ............................................8-9
Funcionamiento .............................9-13
Ajustes ..............................................14
Mantenimiento ..................................15
Accesorios ........................................15
Ilustraciones ................................16-19
Pedidos de piezas /
servicio .......................... Pág. posterior
Seitenansicht 0
1 2 3 4 5 6 ... 47 48

Inhaltsverzeichnis

Seite 1 - OPERATOR’S MANUAL

OPERATOR’S MANUALMANUEL D’UTILISATIONMANUAL DEL OPERADOR7-1/4 in. CIRCULAR SAW DOUBLE INSULATEDSCIE CIRCULAIRE DE 184 mm (7-1/4 po) DOUBLE ISOLATIONS

Seite 2 - POWER TOOL USE AND CARE

10 - EnglishTo guard against kickback, avoid dangerous practices such as the following:Setting blade depth incorrectlySawing into knots or nails i

Seite 3 - CIRCULAR SAW SAFETY WARNINGS

11 - EnglishOPERATIONSTARTING/STOPPING THE SAWSee Figure 9, page 17.To start the saw: Depress the switch. Always let the blade reach full speed, then

Seite 4

12 - EnglishOPERATIONDANGER:If the cord hangs up on the workpiece during a cut, release the switch immediately and allow the blade to come to a compl

Seite 5

13 - EnglishOPERATIONWARNING:Always cut in a forward direction when pocket cutting. Cutting in the reverse direction could cause the saw to climb up o

Seite 6 - WARNING:

14 - EnglishWARNING:Before performing any adjustment, make sure the tool is unplugged from the power supply and the switch is in the OFF position. Fai

Seite 7 - ELECTRICAL

15 - EnglishMAINTENANCEElectric tools used on fiberglass material, wallboard, spackling compounds, or plaster are subject to accelerated wear and poss

Seite 8 - ASSEMBLY

2 - FrançaisRÈGLES DE SÉCURITÉ RELATIVES AUX OUTILS ELECTRIQUESAVERTISSEMENTLire tous les avertissements et toutes les instructions. Ne pas suivre l’e

Seite 9

3 - FrançaisRÈGLES DE SÉCURITÉ RELATIVES AUX OUTILS ELECTRIQUESAVERTISSEMENTS DE SÉCURITÉ RELATIFS SCIE CIRCULAIREde remiser l’outil. Ces mesures de s

Seite 10 - OPERATION

4 - Français Tenir fermement la scie avec les deux mains et positionner les bras de manière à pouvoir résister aux rebonds. Se tenir d’un côté de la

Seite 11

5 - FrançaisAVERTISSEMENTS DE SÉCURITÉ RELATIFS SCIE CIRCULAIREAVERTISSEMENT :Ce produit et la poussière dégagée lors du ponçage, sciage, meulage, per

Seite 12

2 - EnglishGENERAL POWER TOOL SAFETY WARNINGSWARNINGRead all safety warnings and all instructions. Failure to follow the warnings and instructions may

Seite 13

6 - FrançaisSYMBOLESCertains des symboles ci-dessous peuvent être utilisés sur produit. Veiller à les étudier et à apprendre leur signification. Une i

Seite 14 - ADJUSTMENTS

7 - FrançaisCARACTÉRISTIQUES ÉLECTRIQUESCORDONS PROLONGATEURSLors de l’utilisation d’un outil électrique à grande distance d’une prise secteur, veille

Seite 15 - ACCESSORIES

8 - FrançaisCARACTÉRISTIQUESFICHE TECHNIQUEDiamètre de la lame... 184 mm (7-1/4 po)Arbre de la lame ...

Seite 16

9 - FrançaisAVERTISSEMENT :Si la douille à collerette intérieure a été retirée, la remettre en place avant d’installer la lame sur la broche. Le nonre

Seite 17 - AVERTISSEMENTS

10 - FrançaisREBONDVoir les figures 4 à 7, page 17.On appelle rebond la projection brusque de la scie en direction de l’opérateur, causée par un bloca

Seite 18 - INFÉRIEUR

11 - FrançaisUTILISATIONMISE EN MARCHE ET ARRÊT DE LA SCIEVoir la figure 9, page 17.Pour mettre la scie en marche : Appuyer sur la commutateur.Toujour

Seite 19 - AVERTISSEMENT :

12 - FrançaisUTILISATIONAVERTISSEMENT :L’utilisation d’une scie dont le cordon est endommagé pourrait causer un choc électrique et des blessures grave

Seite 20 - SYMBOLES

13 - FrançaisUTILISATIONMaintenez le protège-lame par son levier tout en tenant la main à l’avant de la poignée, comme illustré.Posez fermement

Seite 21 - CARACTÉRISTIQUES ÉLECTRIQUES

14 - FrançaisAVERTISSEMENT :Si le cordon d’alimentation se pose sur la pièce pendant la coupe, relâcher la gâchette immédiatement et permettre à la la

Seite 22 - ASSEMBLAGE

15 - FrançaisENTRETIENLes outils électriques utilisés sur la fibre de verre, le placoplâtre, les mastics de bouchage ou le plâtre s’usent plus vite et

Seite 23 - UTILISATION

3 - EnglishCIRCULAR SAW SAFETY WARNINGSCUTTING PROCEDURESDANGER:Keep hands away from cutting area and the blade. Keep your second hand on auxiliary ha

Seite 24

2 - EspañolADVERTENCIAS DE SEGURIDAD PARA HERRAMIENTAS ELÉCTRICASADVERTENCIALea todas las advertencias de seguridad y las instrucciones. La inobserva

Seite 25

3 - EspañolPROCEDIMIENTOS DE CORTEPELIGRO:Mantenga las manos alejadas del área de corte y de la hoja. Mantenga la otra mano en el mango auxiliar o en

Seite 26

4 - EspañolADVERTENCIAS DE SEGURIDAD SIERRA CIRCULARCAUSAS DE CONTRAGOLPE Y ADVERTENCIAS RELACIONADAS El contragolpe es una reacción súbita a un pel

Seite 27

5 - EspañolADVERTENCIAS DE SEGURIDAD SIERRA CIRCULARADVERTENCIA:Este product y el polvo que crea pueden contener productos químicos, como plomo, que e

Seite 28 - RÉGLAGES

6 - EspañolSÍMBOLOSLas siguientes palabras de señalización y sus significados tienen el objeto de explicar los niveles de riesgo relacionados con este

Seite 29 - ACCESSOIRES

7 - EspañolDOBLE AISLAMIENTOEl doble aislamiento es una característica de seguridad de las herramientas eléctricas, la cual elimina la necesidad de us

Seite 30 - ELÉCTRICAS

8 - EspañolCARACTERISTICASESPECIFICACIONES DEL PRODUCTODiámetro de la Hoja ... 184 mm (7-1/4 pulg.)Eje de la Hoja ...

Seite 31

9 - EspañolARMADOADVERTENCIA:Si el buje de brida interior ha sido retirado, vuelva a colocarlo antes de instalar la hoja en el husillo. De lo contrari

Seite 32 - RELACIONADAS

10 - EspañolCONTRAGOLPEVea las figuras 4 a 7, página 17.El contragolpe sucede cuando la hoja se detiene rápidamente y la sierra sale empujada hacia el

Seite 33 - ADVERTENCIA:

11 - EspañolFUNCIONAMIENTOADVERTENCIA:Nunca fije la protección inferior de la hoja en la posición elevada. Si se deja expuesta la hoja pueden originar

Seite 34 - SÍMBOLOS

4 - EnglishCIRCULAR SAW SAFETY WARNINGS Do not use dull or damaged blades. Unsharpened or improperly set blades produce narrow kerf causing excessiv

Seite 35 - ASPECTOS ELÉCTRICOS

12 - EspañolFUNCIONAMIENTO Trace una línea guía a lo largo de la línea de corte antes de iniciar éste.PELIGRO:Si el cordón se engancha en la pieza d

Seite 36 - CARACTERISTICAS

13 - EspañolFUNCIONAMIENTOCORTE DE CAVIDADESVea la figura 19, página 18.ADVERTENCIA:Siempre regule el ajuste de corte en bisel a cero antes de hacer u

Seite 37 - FUNCIONAMIENTO

14 - EspañolAJUSTESADVERTENCIA:Antes de efectuar cualquier ajuste, asegúrese de que la herramienta esté desconectada del suministro de corriente y de

Seite 38

15 - EspañolMANTENIMIENTOLas herramientas eléctricas que se utilizan en materiales de fibra de vidrio, paneles de yeso para paredes, compuestosde resa

Seite 39

16FACBHEDBAFCDEGIJGNKPOLMFig. 1Fig. 2A - Handle (poignée, mango)B - Front handle (poignée avant, mango delantero)C - Upper blade guard (protection de

Seite 40

17INCORRECT SUPPORT SUPPORT INCORRECT SOPORTE INCORRECTOA - Correct blade depth setting = less than a full tooth of the blade teeth should be visible

Seite 41

18A - Blade guide notch (encoche de guide de lame, muesca guía de la hoja)B - Guideline (ligne de coupe, línea guía)Fig. 14TOP VIEW OF SAW / VUE DU DE

Seite 42

19Fig. 24CDEFDFig. 22A - Hole (trou, agujero)B - Raised lip (bord relevé, reborde)C - Adaptor (adaptateur, adaptador)D - Screw (vis, tornillo)E - Nozz

Seite 43 - ACCESORIOS

9900009659-16-14 (REV:02)ONE WORLD TECHNOLOGIES, INC. 1428 Pearman Dairy Road, Anderson, SC 29625 • Phone 1-800-525-2579 États-Unis, Téléphone 1-800-

Seite 44

5 - EnglishCIRCULAR SAW SAFETY WARNINGSWARNING:This product and some dust created by power sanding, sawing, grinding, drilling, and other construction

Seite 45

6 - EnglishSYMBOLSThe following signal words and meanings are intended to explain the levels of risk associated with this product. Indicates an immine

Seite 46

7 - EnglishEXTENSION CORDSWhen using a power tool at a considerable distance from a power source, be sure to use an extension cord that has the capaci

Seite 47

8 - EnglishFEATURESPRODUCT SPECIFICATIONSBlade Diameter ..... 7-1/4 in.Blade Arbor ...

Seite 48

9 - EnglishREMOVING BLADESee Figures 1 - 3, pages 16 - 17.Unplug the saw.Depress and hold spindle lock button.Remove blade screw by turning it

Kommentare zu diesen Handbüchern

Keine Kommentare