Ryobi C357 Betreibershandbuch

Stöbern Sie online oder laden Sie Betreibershandbuch nach Power Universalschneider Ryobi C357 herunter. Ryobi C357 Operator`s manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 20
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
SAVE THIS MANUAL FOR FUTURE REFERENCE
OPERATOR'S MANUAL
14 in. (356 mm) Abrasive Cut-Off
Machine – Model C357
THANK YOU FOR BUYING A RYOBI ABRASIVE CUT-OFF MACHINE.
Your new cut-off machine has been engineered and manufactured to Ryobi's high standards for dependability, ease of
operation, and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.
CAUTION: Carefully read through this entire operator's manual before using your new machine.
Pay close attention to the Rules for Safe Operation, Warnings, and Cautions. If you use your machine properly and only for
what it is intended, you will enjoy years of safe, reliable service.
Please fill out and return the Warranty Registration Card so we can be of future service to you.
Thank you again for buying Ryobi tools.
0
1
5
Seitenansicht 0
1 2 3 4 5 6 ... 19 20

Inhaltsverzeichnis

Seite 1 - Machine – Model C357

SAVE THIS MANUAL FOR FUTURE REFERENCEOPERATOR'S MANUAL14 in. (356 mm) Abrasive Cut-OffMachine – Model C357THANK YOU FOR BUYING A RYOBI ABRASIVE C

Seite 2 - TABLE OF CONTENTS

Page 10BLADEROTATI0NADJUSTMENTSWARNING:To prevent accidental starting that could cause possibleserious personal injury, assemble all parts to your cut

Seite 3 - RULES FOR SAFE OPERATION

Page 11015ADJUSTMENTSFig. 6ADJUSTABLE FENCESee Figure 6.The adjustable fence is located at the rear of your cut-offmachine. As mentioned previously, i

Seite 4

Page 12ADJUSTMENTSFig. 9Fig. 10QUICK LOCK-RELEASE LEVERWITH THREADS NOT ENGAGEDVISECLAMPVISE CRANKHANDLEVISESCREWVISECLAMPVISE CRANKHANDLEQUICK LOCK-R

Seite 5

Page 13015015015ADJUSTMENTSFig. 11DEPTH STOPThe depth stop limits the wheel's downward travel. Itallows the wheel to go below the machine base en

Seite 6 - ELECTRICAL

Page 14015MATERIALTO BE CUTPOWER SUPPLYBefore operating your cut-off machine, check your powersupply and make sure it meets the requirements listed on

Seite 7 - PRODUCT SPECIFICATIONS

Page 15015OPERATIONFig. 14Fig. 15MACHINEBASEMACHINE ARM(HANDLE)SWITCHTRIGGERMATERIALTO BE CUTADJUSTABLEFENCEVISECLAMPADJUSTABLEFENCEMATERIALTO BE CUT“

Seite 8 - FEATURES

Page 16MAINTENANCEEXTENSION CORDSThe use of any extension cord will cause some loss of power.To keep the loss to a minimum and to prevent tooloverheat

Seite 9

Page 17015WARNING: To ensure safety and reliability, all repairs — with theexception of the externally accessible brushes — shouldbe performed by a R

Seite 10 - ADJUSTMENTS

Page 18TROUBLESHOOTINGPROBLEM CAUSE SOLUTIONMotor does not reach full speed or 1. Voltage from power source is low. 1. Request a voltage check from

Seite 11

Page 19NOTESNOTES

Seite 12

Page 2TABLE OF CONTENTS Table of Contents ...

Seite 13 - OPERATION

972000-882RYOBI TECHNOLOGIES, INC.1428 Pearman Dairy Road Anderson SC 29625Post Office Box 1207 Anderson SC 29622-1207Phone 1-800-525-2579www.ryobitoo

Seite 14

Page 3RULES FOR SAFE OPERATIONThe purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and theexplanations

Seite 15

Page 4RULES FOR SAFE OPERATIONSafe operation of this power tool requires that you read andunderstand this operator's manual and all labels affixe

Seite 16 - MAINTENANCE

Page 5RULES FOR SAFE OPERATIONWARNING: Wheel coasts after turn off. NEVER USE IN AN EXPLOSIVE ATMOSPHERE.Normal sparking of the motor or sparking fro

Seite 17 - TROUBLESHOOTING

Page 6RULES FOR SAFE OPERATIONWARNING:Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemi

Seite 18

Page 7Your abrasive cut-off machine has been shipped completelyassembled. Remove all loose parts from the carton. Remove the packing materials from

Seite 19

Page 8015FEATURESKNOW YOUR ABRASIVE CUT-OFF MACHINESee Figures 2 and 3.Before attempting to use your machine, familiarize yourselfwith all operating f

Seite 20 - Model C357

Page 9Fig. 3LOWERWHEEL GUARDUPPERWHEEL GUARDMACHINE ARMLOCK-ONBUTTONRUBBER FEETCARRYING HANDLEMACHINE BASESWITCH TRIGGERVISE CLAMPPOWER CORDQUICK LOCK

Kommentare zu diesen Handbüchern

Keine Kommentare