Ryobi HP1442M Bedienungsanleitung PDF herunterladen

THANK YOU FOR BUYING A RYOBI CORDLESS DRILL-DRIVER.

Your new cordless drill-driver has been engineered and manufactured to Ryobi’s high standard for dependability, ease of

operation, and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.

CAUTION: Carefully read through this entire operator’s manual before using your new cordless drill-driver.

Pay close attention to the Rules for Safe Operation, Warnings, and Cautions. If you use your cordless drill-driver properly

and only for what it is intended, you will enjoy years of safe, reliable service.

Thank you again for buying Ryobi tools.

OPERATOR'S MANUAL

CORDLESS DRILL-DRIVER

MODEL NOS. HP1442M / HP1802M

SAVE THIS MANUAL FOR FUTURE REFERENCE

MODEL HP1442M

MODEL HP1802M

1 2 3 4 5 6 ... 15 16

Inhaltsverzeichnis

Seite 1 - MODEL NOS. HP1442M / HP1802M

THANK YOU FOR BUYING A RYOBI CORDLESS DRILL-DRIVER.Your new cordless drill-driver has been engineered and manufactured to Ryobi’s high standard for de

Seite 2 - TABLE OF CONTENTS

Page 1020245OPERATIONKEYLESS CHUCKSee Figure 6.A keyless chuck has been provided with your drill to allow foreasy installation and removal of bits. As

Seite 3

Page 1120245OPERATIONWRONGCHUCK JAWSDRILL BITCHUCK COLLARCHUCK BODYINSTALLING BITS Place the direction of rotation selector in center position.This w

Seite 4 - WARNING:

Page 12202024520245OPERATIONSCREWDRIVINGTORQUE ADJUSTMENT(Driving power of your drill-driver)When using your drill-driver for various driving applicat

Seite 5 - SAVE THESE INSTRUCTIONS

Page 13OPERATIONWARNING:Always wear safety goggles or safety glasses with sideshields when operating tool. Failure to do so could resultin objects bei

Seite 6 - FEATURES

Page 142024520245OPERATIONCHUCK REMOVALSee Figures 15, 16, and 17. Lock the switch trigger by placing the direction of rotationselector in center pos

Seite 7

Page 15MAINTENANCEWARNING:When servicing use only identical Ryobi replacementparts. Use of any other parts can create a hazard or causeproduct damage.

Seite 8

OPERATOR'S MANUALCORDLESS DRILL-DRIVERMODEL NOS. HP1442M / HP1802MRYOBI TECHNOLOGIES, INC.1428 Pearman Dairy Road Anderson, SC 29625Post Office B

Seite 9

Page 2 General Safety Rule ...

Seite 10 - OPERATION

Page 3Tool Use and Care Use clamps or other practical way to secure andsupport the workpiece to a stable platform. Holdingthe work by hand or against

Seite 11 - WARNING:

Page 4SPECIFIC SAFETY RULES AND/OR SYMBOLS WARNING:Some dust created by power sanding, sawing, grinding,drilling, and other construction activities co

Seite 12 - LEVEL DRILLING

Page 5SYMBOLS SYMBOL NAME DESIGNATION/EXPLANATIONV Volts VoltageA Amperes CurrentHz Hertz Frequency (cycles per second)min Minutes TimeAlternating C

Seite 13

Page 6FEATURESPRODUCT SPECIFICATIONS: DRILL-DRIVER HP1442M HP1802MChuck 3/8 in. Keyless 1/2 in. KeylessMotor DC Motor 14.4 Volt DC Motor 18 VoltGear T

Seite 14

Page 720245FEATURESKEYLESSCHUCKBITSTORAGEAREATORQUEADJUSTMENTRINGSWITCHTRIGGERLEVELMODEL HP1442MMODEL HP1802MFig. 1Fig. 1aBATTERYPACKDIRECTION OFROTAT

Seite 15 - MAINTENANCE

Page 8OPERATIONFig. 2WARNING:If any parts are missing, do not operate tool until themissing parts are replaced. Failure to do so could resultin possib

Seite 16

Page 92024520245OPERATIONFig. 5Fig. 4SWITCHSee Figure 4.Your drill starts and stops by depressing and releasing theswitch trigger. Release the switch