Your new trimmer or brushcutter has been engineered and manufactured to our high standard for dependability, ease of operation, and operator safety. P
10ASSEMBLYUNPACKINGThis product requires assembly. Carefully remove the tool and any accessories from the box. Make sure that all items listed in th
11INSTALLING THE POWER HEAD TO THE ATTACHMENTSee Figure 2.WARNING:Never install, remove, or adjust any attachment while power head is runn
12ATTACHING THE FRONT HANDLE - CS30 AND SS30See Figure 4. Remove wing nut, washer, and bolt from the front handle. Install the front handl
13ATTACHING THE GRASS DEFLECTOR WARNING:The line cutting blade on the grass deflector is sharp. Avoid contact with the blade. Failure to avoid contac
14ATTACHING THE SHOULDER HARNESS - BC30See Figure 9. Connect the latch on the shoulder harness to the strap hanger. Adjust the strap to a comf
15ASSEMBLYREMOVING THE STRAIGHT SHAFT GRASS DEFLECTOR AND STRING HEADSee Figures 10 - 13. Align the slot in the flanged washer with the slot in
16FUELING AND REFUELING THE TRIMMERFUEL MIXTUREThis product is powered by a 2-cycle engine and requires pre-mixing gasoline and 2-cycle lubricant. Pre
17Fig. 15PROPER OPERATING POSITIONOPERATIONOPERATING THE TRIMMERSee Figure 15.WARNING:Always position the unit on the operator’s right side. The use
18WARNING:Always hold the string trimmer away from the body keep-ing clearance between the body and the product. Any contact with the housing
19 Inspect and clear the area of any hidden objects such as glass, rocks, concrete, fencing, wire, wood, metal, etc. Never use blades near sidew
2 Introduction ...
20OPERATIONSTARTING AND STOPPINGSee Figures 21 - 23.To start a cold engine:DO NOT squeeze the throttle trigger until the engine starts and runs.Lay
21MAINTENANCE NOTE: Only use the knob to tighten the bolt. The use of other tools may allow overtightening of the bolt, which could damage the string
22MAINTENANCEFig. 26INSTALLING STRING IN REEL EASY STRING HEADSee Figures 26 - 27.Use .095 in. diameter monofilament string. Stop the engine and dis
23INSTALLING STRING IN PRO CUT II STRING HEAD See Figure 29.Use monofilament string between .095 in. and .105 in. di-ameter. Use original manufactu
24MAINTENANCECLEANING AIR FILTER SCREENSee Figures 30 - 31.For proper performance and long life, keep air filter screen clean. Remove the air filter
25PROBLEM POSSIBLE CAUSE SOLUTIONIF THESE SOLUTIONS DO NOT SOLVE THE PROBLEM CONTACT YOUR AUTHORIZED SERVICE DEALER.TROUBLESHOOTING1. Clean or repl
26PROBLEM POSSIBLE CAUSE SOLUTIONIF THESE SOLUTIONS DO NOT SOLVE THE PROBLEM CONTACT YOUR AUTHORIZED SERVICE DEALER.TROUBLESHOOTING1. Clean threads
27WARRANTYLIMITED WARRANTY STATEMENTTechtronic Industries North America, Inc., warrants to the original retail purchaser that this RYOBI® brand outdoo
28WARRANTYTHE FOLLOWING CALIFORNIA AIR RESOURCES BOARD (CARB) STATEMENT ONLY APPLIES TO MODEL NUMBERS REqUIRED TO MEET THE CARB REqUIREMENTS.The U.S.
NOTES
3GENERAL SAFETY RULESWARNING:Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire
TECHTRONIC INDUSTRIES NORTH AMERICA, INC.1428 Pearman Dairy Road, Anderson, SC 29625Phone 1-800-860-4050www.ryobitools.comOPERATOR’S MANUAL30cc String
4SPECIFIC SAFETY RULESSPECIFIC SAFETY RULES FOR TRIMMER USE Inspect before use. Replace damaged parts. Make sure fasteners are in place and secu
5SYMBOLSSome of the following symbols may be used on this product. Please study them and learn their meaning for safe operation of this product.SYMBOL
6SYMBOLSSERVICEServicing requires extreme care and knowledge and should be performed only by a qualified service technician. For service we sugg
7FEATURESPRODUCT SPECIFICATIONSWeight - (without fuel) CS30 ...
8FEATURESFig. 1bFig. 1cTHROTTLE TRIGGER FRONT HANDLECOUPLERDRIVE SHAFT HOUSINGREEL EASYSTRING HEADSTRAIGHT SHAFT GRASS DEFLECTORTHROTTLE TRIGGER“J” HA
9FEATURESKNOW YOUR STRING TRIMMERSee Figures 1a - 1d.The safe use of this product requires an understanding of the information on the tool and in this
Kommentare zu diesen Handbüchern