Ryobi CSB132L Betreibershandbuch Seite 1

Your circular saw has been engineered and manufactured to our high standard for dependability, ease of operation, and operator safety. When properly c

10WARNING: If any parts are damaged or missing do not operate this product until the parts are replaced. Failure to heed this warning could

11CAUTION:To prevent damage to the spindle or spindle lock, always allow motor to come to a complete stop before engaging spindle lock.ATTACHING BLADE

12WARNING:Do not allow familiarity with products to make you careless. Remember that a careless fraction of a second is sufficient to inflict

13DANGER:When sawing through work, lower blade guard does not cover blade on the underside of work. Since blade is exposed on underside of wor

14Fig. 11OPERATIONADJUSTING BLADE DEPTHSee Figure 10.Always keep correct blade depth setting. The correct blade depth setting for all cuts should not

15OPERATING THE SAWSee Figures 12 - 14.It is important to understand the correct method for operating the saw. Refer to the figures in this section to

16OPERATIONCROSS CUTTING/RIP CUTTINGSee Figure 15.When making a cross cut or rip cut, align the line of cut with the outer blade guide notch on the ba

17OPERATIONLENGTH OF CUT SCALESee Figure 18.The saw is equipped with a length of cut scale on its base. It is parallel with the saw blade and you can

18OPERATIONBEVEL CUTTINGSee Figures 20 - 21.To make the best possible cut, follow these helpful hints. Align the line of cut with the inner blade gu

19OPERATIONPOCKET CUTTINGSee Figure 22.WARNING:Always adjust bevel setting to zero before making a pocket cut. Attempting a pocket cut at any

2 Introduction ...

20DANGER:DO NOT point the laser at yourself or others. Class IIIa lasers will burn the retinas and could cause serious injury to the eyes.WARNING: Bef

210° BEVEL STOPSee Figure 24.The saw has a 0° bevel stop that has been factory adjusted to assure 0° angle of the saw blade when making 90° cuts.TO C

22WARNING:When servicing use only identical replacement parts. Use of any other parts may create a hazard or cause product damage.WARNING:A

23NOTES

24OPERATOR’S MANUAL7-1/4 in. LASER CIRCULAR SAWDOUBLE INSULATEDCSB132L• PARTS AND SERVICEPrior to requesting service or purchasing replacement parts,

3GENERAL SAFETY RULESWARNING:Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire

4SPECIFIC SAFETY RULES DANGER! Keep hands away from cutting area and blade. Keep your second hand on the auxiliary handle or motor housing. If bot

5SPECIFIC SAFETY RULES Do not use dull or damaged blade. Unsharpened or improperly set blades produce narrow kerf which causes excessive friction, b

6SYMBOLSSome of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols

7SYMBOLSSERVICEServicing requires extreme care and knowledge and should be performed only by a qualified service technician. For service we sugg

8ELECTRICALEXTENSION CORDSWhen using a power tool at a considerable distance from a power source, be sure to use an extension cord that has the capaci

9FEATURESPRODUCT SPECIFICATIONS Blade Diameter ............ 7-1/4 in. Blade Arbor ........