Ryobi CSB133L Betreibershandbuch

SAVE THIS MANUAL FOR FUTURE REFERENCEYour circular saw has been engineered and manufactured to our high standard for dependability, ease of operation,

10FEATURESKNOW YOUR CIRCULAR SAWSee Figure 1.The safe use of this product requires an understanding of the information on the product and in this oper

11ASSEMBLYATTACHING BLADESee Figures 2 - 4. Unplug the saw. Depress and hold spindle lock button. Remove blade screw by turning it counterclock

12WARNING:Do not allow familiarity with this product to make you careless. Remember that a careless fraction of a second is sufficient to inflict seri

13OPERATIONInspect the workpiece for knots or nails before cutting. Never saw into a knot or nail.Make straight cuts. Always use a straight ed

14OPERATIONIf at any time the lower blade guard does not snap closed, unplug the saw from the power supply. Exercise the lower guard by moving it rapi

15OPERATIONUSING THE LASER GUIDESSee Figure 12.WARNING:Do not stare into the laser beams or turn the lasers on when the tool is not in use. Failure to

16OPERATIONOPERATING THE SAWSee Figures 13 - 15.It is important to understand the correct method for operat-ing the saw. Refer to the figures in this

17OPERATIONLENGTH OF CUT SCALESee Figure 16.The saw is equipped with a length of cut scale on its base. It is parallel with the saw blade and can be u

18OPERATIONWARNING:Attempting a bevel cut without having the bevel ad-justment knob securely tightened can result in serious injury.TO BEVEL C

19OPERATION4551.53015Fig. 22POCKeT CUTLOwer BLaDe GUarDLOwer BLaDeGUarD HaNDLePOCKET CUTTINGSee Figure 22.WARNING:Always adjust bevel setting to

2 Introduction ...

20Fig. 23BeVeLaDJUSTMeNTKNOBBLaDeCOMBINaTIONSQUareaDJUSTING SCrewHex NUT0° BeVeL STOP51.5153045OPERATION0° BEVEL STOPSee Figure 23.The saw has a 0° be

21OPERATIONOPTIONAL EDGE GUIDESee Figure 24.Use the optional edge guide, part no. 969862009, when making long or wide rip cuts with the saw. T

22aDJUSTING SCrewFig. 27LaSer BarreLFig. 28LaSer BarreLADJUSTMENTSWARNING:Before performing any adjustment, make sure the product is unplugged from th

23MAINTENANCEElectric tools used on fiberglass material, wallboard, spack-ling compounds, or plaster are subject to accelerated wear and possible prem

CSB133LOPERATOR’S MANUAL7-1/4 in. LASER CIRCULAR SAWDOUBLE INSULATEDCSB133L987000-3274-1-08 (REV:00)• PARTS AND SERVICEPrior to requesting service or

3WARNING!Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The

4 DANGER! Keep hands away from cutting area and the blade. Keep your second hand on auxiliary handle or motor housing. If both hands are holding the

5SPECIFIC SAFETY RULESlower guard may be bent. Raise the lower guard with the retracting handle. Make sure it moves freely and does not touch the blad

6SYMBOLSSome of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols

7SYMBOLSSERVICEServicing requires extreme care and knowledge and should be performed only by a qualified service technician. For service we su

8EXTENSION CORDSWhen using a power tool at a considerable distance from a power source, be sure to use an extension cord that has the capacity to hand

9FEATURESPRODUCT SPECIFICATIONSBlade Diameter ............ 7-1/4 in.Blade Arbor ........