Ryobi R161 Betreibershandbuch PDF herunterladen (Seite 1)

OPERATOR'S MANUAL

R161 ROUTER

DOUBLE INSULATED

SPECIFICATIONS:

Depth Of Cut 0 - 1-1/2 in. (0 - 38.1 mm)

Collet 1/4 in. (6.4 mm)

Horsepower 1-1/2 HP

Rating 120 Volts, 60Hz, AC Only

Amperes 8.0

No Load Speed 25,000 RPM

Net Weight 7.8 lbs. (3.5 kg)

SAVE THIS MANUAL FOR FUTURE REFERENCE

THANK YOU FOR BUYING A RYOBI ROUTER.

Your new router has been engineered and manufactured to Ryobi's high standard for dependability, ease of operation, and

operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.

CAUTION: Carefully read through this entire operator's manual before using your new router.

Pay close attention to the Rules for Safe Operation, Warnings, and Cautions. If you use your router properly and only for what

it is intended, you will enjoy years of safe, reliable service.

Thank you again for buying a Ryobi router.

1 2 3 4 5 6 ... 15 16

Inhaltsverzeichnis

Seite 1 - R161 ROUTER

OPERATOR'S MANUALR161 ROUTERDOUBLE INSULATEDSPECIFICATIONS:Depth Of Cut 0 - 1-1/2 in. (0 - 38.1 mm)Collet 1/4 in. (6.4 mm)Horsepower 1-1/2 HPRati

Seite 2 - TABLE OF CONTENTS

Page 10be advanced. If the wood is very hard, knotty, gummy ordamp, the operation must be slowed still more.You can always detect “force feeding” by t

Seite 3 - RULES FOR SAFE OPERATION

Page 11OPERATIONFig. 10WIDTHOF CUT 1ST.PASS2ND.PASS2ND. PASS1ST. PASSGUIDE INSIDEFig. 12THRUSTGUIDEFEEDROTATION ROTATIONGUIDE OUTSIDEDEPTHOF CUTFig. 1

Seite 4

Page 12Fig. 13OPERATIONWARNING:Keep a firm grip on router with both hands at all times.Failure to do so could result in loss of control leading toposs

Seite 5 - SAVE THESE INSTRUCTIONS

Page 135 329 641 87 643 33 16136411 64FREEHAND ROUTINGSee Figure 14.When used freehand, your router becomes a flexible andversatile tool. This fl

Seite 6 - UNPACKING

Page 14OPERATIONROUTER TABLE USESee Figures 16 and 17. Your router can be used on UL listed router tables suchas the Ryobi BT3000SXI Precision Cuttin

Seite 7 - WARNING:

Page 15HELPFUL HINTS✓ Always clamp workpiece securely before routing.✓ A safe operator is one who thinks ahead.✓ Always wear eye protection when routi

Seite 8 - INSTALLING/REMOVING CUTTERS

OPERATOR'S MANUALR161 ROUTERDOUBLE INSULATED972000-891 6-01Printed in U.S.A.RYOBI TECHNOLOGIES, INC.1428 Pearman Dairy Road Anderson SC 29625

Seite 9 - IS MOUNTED TO A ROUTER TABLE

Page 2 Table of Contents and Introduction...

Seite 10 - See Figure 9

Page 3RULES FOR SAFE OPERATIONThe purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and theexplanations

Seite 11 - See Figure 11

Page 4RULES FOR SAFE OPERATIONSafe operation of this power tool requires that you read andunderstand this operator's manual and all labels affixe

Seite 12 - Figure 13

Page 5SAVE THESE INSTRUCTIONS POLARIZED PLUGS. To reduce the risk of electric shock,this tool has a polarized plug (one blade is wider than theother)

Seite 13 - See Figure 15

Page 6ELECTRICALEXTENSION CORDS When using a power tool at a considerable distance from thepower source, use an extension cord heavy enough to carryth

Seite 14 - MAINTENANCE

Page 75 329 641 87 643 33 16136411 64KNOW YOUR ROUTERSee Figure 1.Before attempting to use your router, familiarize yourselfwith all operating fe

Seite 15 - OPTIONAL ACCESSORIES

Page 87326415640 Remove cutters by turning collet nut counterclockwiseenough to allow cutter to slip easily from collet. SeeFigure 3. The collet is m

Seite 16

Page 9TOLOCKCLAMPINGLEVERFig. 5DEPTHADJUSTINGRINGSUBBASEINDICATORPOINTCUTTERINSIDE SUBBASEDEPTHINDICATORRINGCUTTER ATZERO DEPTH OF CUTBASEINDICATORPOI