Ryobi D46C Betreibershandbuch Seite 1

Stöbern Sie online oder laden Sie Betreibershandbuch nach Elektrowerkzeuge Ryobi D46C herunter. Ryobi D46C Operator`s manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 16
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
OPERATOR’S MANUAL
3/8 in. DRILL
DOUBLE INSULATED
D46C
Your drill has been engineered and manufactured to our high standard for dependability, ease of operation, and operator
safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING: To reduce the risk of injury, the user must read and understand the operator's manual before using
this product.
Thank you for your purchase.
SAVE THIS MANUAL FOR FUTURE REFERENCE
Seitenansicht 0
1 2 3 4 5 6 ... 15 16

Inhaltsverzeichnis

Seite 1 - OPERATOR’S MANUAL

OPERATOR’S MANUAL 3/8 in. DRILL DOUBLE INSULATED D46C Your drill has been engineered and manufactured to our high standard for dependability, ease of

Seite 2 - WARRANTY

10DIRECTION OF ROTATION SELECTOR(FORWARD/REVERSE)See Figure 2.The direction of bit rotation is reversible and is controlled by a selector located abov

Seite 3 - GENERAL SAFETY RULES

11OPERATIONINSTALLING BITSSee Figure 5 - 6. Unplug the drill. Open or close the chuck jaws to a point where the open-ing is slightly larger than t

Seite 4 - SPECIFIC SAFETY RULES

12OPERATIONTO INCREASETORQUEFig. 8 TO DECREASETORQUETORQUE ADJUSTMENT RINGADJUSTABLE TORQUE CLUTCHSee Figure 8.This product is equipped with an

Seite 5 - DESIGNATION/EXPLANATION

13WARNING:When servicing, use only identical replacement parts. Use of any other parts may create a hazard or cause product damage.WAR

Seite 6 - SAVE THESE INSTRUCTIONS

14MAINTENANCEFig. 10 Fig. 11Fig. 12SCREWDRIVERHEX KEYKEYLESSCHUCKMALLETCHUCK JAWSCHUCK REMOVAL See Figures 10 - 12.The chuck may be removed and replac

Seite 8 - FEATURES

16ONE WORLD TECHNOLOGIES, INC.1428 Pearman Dairy Road, Anderson, SC 29625Phone 1-800-525-2579www.ryobitools.com983000-80801-09-05 (REV:00)• SERVICENo

Seite 9 - ASSEMBLY

2TABLE OF CONTENTS Introduction ...

Seite 10 - OPERATION

3GENERAL SAFETY RULESWARNING: Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fir

Seite 11

4SERVICE Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel may resu

Seite 12

5SYMBOLSSome of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation of these symbols will

Seite 13 - MAINTENANCE

6The following signal words and meanings are intended to explain the levels of risk associated with this product.DANGER:Indicates an imminently hazard

Seite 14

7EXTENSION CORDSWhen using a power tool at a considerable distance from a power source, be sure to use an extension cord that has the capacity to h

Seite 15

8FEATURESFig. 1PRODUCT SPECIFICATIONSChuck ...... 3/8 in.Switch ...

Seite 16 - in. DRILL

9WARNING: If any parts are damaged or missing do not operate this tool until the parts are replaced. Failure to heed this warning could res

Kommentare zu diesen Handbüchern

Keine Kommentare